| Property | Value |
|---|---|
| Accelerated Speed | 14 fps |
| Overall Length (In.) | 2 in |
| Body Width (In.) | 0.75 in |
| Mounting Hole Dia. (In.) | 0.1875 in |
| Static Load Capacity (Lb.) | 1,950 lb |
| Dimension H1 | #8 |
| Dimension F | 0.25 in |
| Dynamic Load Capacity (Lb.) | 1,950 lb |
| Dimension B | 2 in |
| Mounting Hole Dia. (mm) | 0.188 in |
| Overall Height (In.) | 1.625 in |
| Liner | Frelon(TM) Gold |
| Dimension G | 0.75 in |
| Dimension A | 1 in |
| Dimension C | 0.625 in |
| Mounting Surface to Shaft Center (In.) | 1 in |
| Lubrication | No Lubrication System |
| Dimension H | 0.1875 in |
| Bolt Size | #8 |
| Flange Thickness (In.) | 0.25 in |
| Temp. Range (F) | 0 - 400 |
| Overall Width (In.) | 0.625 in |
| Dimension D | 1.625 in |
| Bore Dia. (In.) | 0.5 in |
| Dimension I | 1 in |
| Dimension E | 1.5 in |
| Steady State Speed | 5 fps |
| Type | End Support Block |
| Item | Mounted Linear Bearing |
| Material | Aluminum |
| Finish | Anodized |
| Nominal Inside Diameter | 1/2 in |
| Flange Width | 0.625 in |
| System of Measurement | Inch |
| For Use With | Linear Shafting |
| Minimum Operating Temperature | 0 Degrees F |
| Top Length | 0.875 in |
| Number of Mounting Holes | 2 |
| Series | Dayton |
| Mounting Hole Center to Center Distance | 1.5 in |
| Flange Thickness | 0.25 in |
| Maximum Operating Temperature | 400 Degrees F |
| Construction | Anodized Aluminum |
| Base Width | 0.625 in |
| Mounting Hole Size | 0.188 in |
| Operating Temperature - Minimum | 0 Degrees F |
| Mounting Hole Center to Center | 1.5 in |
| Overall Height | 1.625 in |
| Operating Temperature - Maximum | 400 Degrees F |
| Mounting Surface to Shaft Center | 1 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Shaft Support, 0.500 In Bore, 1.625 In H, Dayton, Mfr#: 2CNU7
$74.49
Free shipping will be applied on orders over $50
Mounted Linear Bearing, System of Measurement Inch, For Use With Linear Shafting, Nominal Inside Diameter 1/2 in, Mounting Hole Center to Center 1.5 in, Overall Height 1.625 in, Mounting Surface to Shaft Center 1 in, Finish Anodized, Material Aluminum, Series Dayton, Bolt Size #8, Base Width 0.625 in, Mounting Hole Size 0.188 in, Number of Mounting Holes 2, Operating Temperature - Maximum 400 Degrees F, Operating Temperature - Minimum 0 Degrees F, Top Length 0.875 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.