| Property | Value |
|---|---|
| Item | Linear Shaft |
| Shaft Dia. | 3/4 in |
| Length | 18 in |
| Material | Stainless Steel |
| Dimension B | 0.625 in |
| For Use With | Slide/Sleeve Bearing |
| Mounting Hole Center to Center | Not Applicable |
| Finish | Stainless Steel Coated |
| Dia. Tolerance Max. | 0.7497 in |
| Dimension L | 18 |
| Thread Length (In.) | 0.625 in |
| Thread Size | 5/16 |
| Travel Length (In.) | 18 in |
| Type | Both Ends Tapped Shaft |
| Mounting End Dia. (In.) | 0.75 in |
| Min. Surface Hardness | 56 RC |
| Dimension M | 5/16-18 |
| Temp. Range (F) | 284 Degrees F |
| Dia. Tolerance Min. | 0.7492 in |
| System of Measurement | Inch |
| Surface Roughness | 16 uin |
| Diameter Tolerance Class | g6 |
| Min. - Max. Shaft Diameter | 0.7492 in - 0.7497 in |
| Operating Temperature - Maximum | 284 Degrees F |
| Diameter Tolerance - Minimum | 0.749 in |
| Roughness | 0.4 um Ra |
| Mounting Hole Center to Shaft End | Not Applicable |
| Diameter | 3/4 in |
| Mounting Hole Diameter | Not Applicable |
| Weight Per Meter | Not Applicable |
| Core Type | Solid |
| Diameter Tolerance - Maximum | 0.75 in |
| End Thread Size | 5/16-18 |
| Tolerance Class | g6 |
| Overall Length | 18 in |
| End Thread Length | 0.625 in |
| Series | SFWS |
| End Type | Both Ends Tapped |
| Mounting Hole Type | Not Applicable |
| Number of Mounting Holes | Not Applicable |
| Shaft Type | Both Ends Tapped Shaft |
| End Thread Diameter | 0.3125 in |
| Surface Hardness - Minimum | 56 HRC |
| Mounting Hole Thread Size | Not Applicable |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 1 |
Shaft, SS, 0.750 In D, 18.00 In, Nb, Mfr#: SFWS12X18FS103
$109.99
Free shipping will be applied on orders over $50
Linear Shaft, System of Measurement Inch, Diameter 3/4 in, Shaft Type Both Ends Tapped Shaft, End Type Both Ends Tapped, Core Type Solid, Overall Length 18 in, Surface Hardness - Minimum 56 HRC, Material Stainless Steel, Finish Stainless Steel Coated, End Thread Size 5/16-18, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum 0.749 in, Diameter Tolerance - Maximum 0.75 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.