| Property | Value |
|---|---|
| Item | Jobber Length Drill Bit |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Fractional Inch |
| Drill Bit Size | 1/2 in |
| Drill Bit Point Angle | 140 Degrees |
| Drill Bit Material | Solid Carbide |
| Decimal Equivalent | 0.5000 |
| Drill Bit Finish | WXS |
| Flute Type | Slow Spiral |
| Coolant Fed | Coolant Through |
| Shank Dia. | 14 mm |
| Overall Length | 167.00 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 104.00 mm |
| Maximum Drilling Depth | 104 mm |
| Point type | R |
| Depth:Dia. Ratio | 5xD |
| Coolant Through | No |
| List Number | 5955NI |
| Depth x Dia. Ratio | 5xD |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Nickel Alloy: Inconel, Hardened Steels : 35 HrC, Hardened Steels : 35-45 HrC, Hardened Steels : 45-50 HrC, Hardened Steels : 50-70 HrC |
| Material - Machining | Carbide |
| Primary Material Application | Hardened Steel, Nickel, Steel |
| Primary Material Application ISO Code | H, P, S |
| Standards | Not Rated |
| Finish - Machining | WXS |
| Shank Length | 63.00 mm |
| Measurement System | Fractional Inch |
| Shank Type - Machining | Straight |
| Helix Angle | 12 Degrees to 20 Degrees |
| Secondary Material Application ISO Code | H, K, P |
| Secondary Material Application | Cast Iron, Die Steel, Hardened Steel, High Carbon Steel, Low Carbon Steel, Medium Carbon Steel |
| Drill Diameter Tolerance | +0.000/-0.027 mm |
| Series | 5955Ni |
| Number of Coolant Holes | 2 |
| Sheeter Drill | No |
| Drill Bit Point Type | R Thinning Point |
| Drill Length Class | Jobber Length |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jobber Drill Bit, 1/2 in., Carbide, OSG, Mfr# 595550011
$271.99
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size 1/2 in, Drill Bit Point Angle 140 Degrees , Carbide, WXS, Decimal Equivalent 0.5000, Fractional Inch, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 2
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.