| Property | Value |
|---|---|
| Drill Bit Grouping | Drill Bit |
| Item | Jobber Length Drill Bit |
| Drill Bit Dimension Type | Metric |
| Drill Bit Size | 0.75 mm |
| Shank Type | Straight |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Material | High Speed Steel |
| Drill Bit Finish | Uncoated |
| Decimal Equivalent | 0.0295 |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Shank Dia. | 0.75 mm |
| Overall Length | 28.00 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 9.00 mm |
| Maximum Drilling Depth | 9 mm |
| Number of Pieces | 1 |
| Standards | DIN 338 |
| Depth:Dia. Ratio | 8xD |
| Application | For Cast Iron, Steel |
| Coolant Through | No |
| Depth x Dia. Ratio | 8xD |
| Point type | Conical |
| Grade | General Purpose |
| List Number | A1211 |
| Drilling Depth | 7.80mm |
| Shank Length | 19.00 mm |
| Primary Material Application | Cast Iron, Steel |
| Material - Machining | High Speed Steel |
| Sheeter Drill | No |
| Drill Length Class | Jobber Length |
| Material Grade - Machining | General Purpose |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper, Hardened Steel, Nickel, Titanium |
| Secondary Material Application ISO Code | M, N, O, S |
| Finish - Machining | Bright (Uncoated) |
| Drill Diameter Tolerance | H8 |
| Shank Type - Machining | Straight |
| Measurement System | Metric |
| Series | N |
| Drill Point Length | 0.225mm |
| Primary Material Application ISO Code | K, P |
| Drill Bit Point Type | Conical Point |
| Country of Origin (subject to change) | France |
| Package Quantity | 1 |
Walter Titex - Jobber drill, WALTER TITEX, Mfr# A1211-0.75
$4.59
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size 0.75 mm, Drill Bit Point Angle 118 Degrees , High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.0295, Metric, Drill Bit Point Type Conical Point, Non-Coolant Through
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.