| Property | Value |
|---|---|
| Bearing Insert Type | Radial Ball |
| Bore Dia. | 5/8 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 2 1/2 in |
| Series | Standard Duty |
| Bolt Size | 3/8 in |
| Overall Height | 1 5/16 in |
| Dimension D | 15/32 in |
| Locking Type | Set Screw |
| Housing Material | Cast Iron |
| Dimension C | 2 1/2 in |
| Item | 4 Bolt Flange Bearing |
| Dynamic Load Capacity | 2,146 lbf |
| Temp. Range | -20 Degrees to 200 Degrees F |
| Bearing Lubrication | Chevron SRI-2 or NLGI #2 Equivalent |
| Dimension A | 3 3/8 in |
| Finish | Painted |
| Overall Length | 3.375 in |
| Static Load Capacity | 1,074 lb |
| Includes | (2) Set Screws, Oiler Cap |
| Overall Width | 3.375 in |
| Dimension F | 1 19/64 in |
| Standards | Not Applicable |
| Lubrication Openings | Oiler Hole |
| Minimum Temperature | -20 Degrees F |
| Mount Hole Center-to-Center Length | 2.5 in |
| Rolling Element Rows | 1 |
| Includes Mounting Hardware | Yes |
| Lubricant Material | Chevron SRI 2, NLGI #2 Equivalent |
| Bore Type | Cylindrical |
| Mounting Bolt Size | 3/8 in |
| Mount Hole Center-to-Center Height | 2.5 in |
| Housing Material Finish | Painted |
| Seal Material | Buna-N Rubber |
| Number of Mount Holes | 4 |
| Bore Diameter | 5/8 in |
| Maximum Temperature | 200 Degrees F |
| System of Measurement | Inch |
| Bearing Material Grade | 52100 |
| Closure | Single Sealed |
| Static Radial Load Capacity | 1,074 lbf |
| Housing Type | Square |
| Bore Diameter Tolerance | +0.0015 |
| Bolt Circle Diameter | 0.375 in |
| Split Housing | Not Split |
| Seal Type | Shroud Contact Seal with Rubber Lip and Metal Shield |
| Resistance Properties | Wear Resistant |
| Features | Nylon Patch 3A Set Screws, Relubricatable Unit with Anti-rotation Pin, Self Alignment Capabilities, Serviceability of Assemblies |
| Mount Hole Size | 0.4688 |
| Load Direction | Radial |
| Center Height | 1 11/16 in |
| Back Side to Center Width | 0.591 in |
| Self Lubricating Bearing | No |
| Maximum Ball Swivel | Not Applicable |
| Maximum Speed | 7,300 RPM Grease |
| Application | Not Applicable |
| Maximum PV | Not Applicable |
| Expansion Type | Fixed |
| Flange Thickness | 1 in |
| Housing Material Grade | High Grade Cast Iron |
| Inner Ring Width | 0.517 in |
| For Environment | Highly Dusty and Dirty |
| Maximum Misalignment Angle | 1.5 Degrees |
| Pilot Diameter | Not Applicable |
| Included Bearing | WJB UC202-10 Insert Bearing |
| Brand u0026 Part Number | DAYTON 3FCX1 |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Flange Bearing, 4-Bolt, Ball, 5/8" Bore, DAYTON, Mfr# 3FCX1
$40.4
Free shipping will be applied on orders over $50
4 Bolt Flange Bearing, Back Side to Center Width 0.591 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 5/8 in, Bore Type Cylindrical, Center Height 1 11/16 in, Closure Single Sealed, Expansion Type Fixed, For Environment Highly Dusty and Dirty, Housing Material Cast Iron, Housing Type Square, Included Bearing WJB UC202-10 Insert Bearing, Lubricant Material Chevron SRI 2, NLGI #2 Equivalent, Maximum Speed 7,300 RPM Grease, Maximum Temperature 200 Degrees F
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.