| Property | Value |
|---|---|
| Bearing Insert Type | Radial Ball |
| Bore Dia. | 1/2 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Zinc Die Cast |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 2 1/2 in |
| Series | F2DC-BL |
| Bolt Size | 1/4 in |
| Overall Height | 1 1/16 in |
| Housing Material | Zinc Die Cast |
| Temp. Range | -30 Degrees to 200 Degrees F |
| Dimension E | 2 1/2 in |
| Dimension C | 2 1/2 in |
| Static Load Capacity | 1,075 lb |
| Overall Width | 2 in |
| Dynamic Load Capacity | 2,152 lbf |
| Dimension F | 1 1/16 in |
| Dimension L | 1 1/16 in |
| Item | 2 Bolt Flange Bearing |
| Finish | None |
| Dimension H | 1/2 in |
| Dimension J | 9/32 Sq. |
| Overall Length | 3.25 in |
| Includes | (2) Set Screws |
| Dimension B | 3 1/4 in |
| Locking Type | Set Screw |
| Dimension D | 2 in |
| Standards | California Proposition 65, DFARS Compliant, ISO Certified, Reach Certified, RoHS 3 Certified, TOXIC SUBSTANCES CONTROL ACT SECTION |
| Bore Diameter | 1/2 in |
| Closure | Double Sealed |
| Features | Ball Bearing is Pre-Lubricated and Made to ABEC-1 Tolerance, Housing Retains Bearing Securely by Pressing the Lip 360 Degrees Over the Outer Race, Ideal for Applications Requiring Strong Load Support in Limited Mounting Areas, Neoprene Seal Keeps Contaminants Out Allowing for Usage in Wet or Dry Conditions, Solid Zinc Die Cast Housing is Non-Corrosive and Lightweight, Wide Inner Race Locks Securely to the Shaft with Two Set Screws |
| Bore Diameter Tolerance | +0.0005 in; +0.001 in |
| System of Measurement | Inch |
| Includes Mounting Hardware | Yes |
| Lubricant Material | NLGI #2 Equivalent |
| Mounting Bolt Size | 1/4 in |
| Mount Hole Center-to-Center Length | 2.5 in |
| Rolling Element Rows | 1 |
| Number of Mount Holes | 2 |
| Resistance Properties | Corrosion Resistant |
| Housing Material Finish | Unfinished |
| Mount Hole Size | 9/32 in |
| Lubrication Openings | One Zirc Fitting |
| Static Radial Load Capacity | 1,075 lbf |
| Mount Hole Center-to-Center Height | 2.5 in |
| Bearing Material Grade | 52100 |
| Maximum Speed | 6,000 RPM |
| Housing Type | Rhombus |
| Seal Material | Rubber |
| Maximum Temperature | 200 Degrees F |
| Bore Type | Cylindrical |
| Minimum Temperature | -30 Degrees F |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
1A396 Flange Mount Bearing (2 Bolt), Dayton, Mfr#: 1A396
$25.99
Free shipping will be applied on orders over $50
2 Bolt Flange Bearing, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1/2 in, Bore Type Cylindrical, Closure Double Sealed, Housing Material Zinc Die Cast, Housing Type Rhombus, Lubricant Material NLGI #2 Equivalent, Maximum Speed 6,000 RPM, Maximum Temperature 200 Degrees F, Minimum Temperature -30 Degrees F, Mount Hole Center-to-Center Height 2.5 in, Number of Mount Holes 2, Overall Height 1 1/16 in, Overall Length 3.25 in, Overall Width 2 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.