| Property | Value |
|---|---|
| For Use With | SP-ENC-V-SP-800SR-1851P-39 |
| Housing Material | 316L Stainless Steel |
| Inlet Size | 2 |
| Motor Type | Electric AC Brush |
| Voltage | 110vac |
| Action Type | Centrifugal |
| Max. Flow GPM | 15 gpm |
| Application | For Transferring Dairy Products, Pharmaceuticals and Food/Beverage Ingredients |
| Outlet Size | 1-1/2 |
| Wetted Materials | 316L Stainless Steel, PTFE Viton, Silicon Carbide |
| Type | Motor and Tube |
| Max. GPM for Water | 12 |
| Seal Material | Silicone Carbide, Stainless, Viton |
| Gasket Material | PTFE |
| Self-Priming | Yes |
| DEF Compatible | No |
| Max. Viscosity | 10,000 cps |
| RPM | 900 |
| Suction Tube Type | Centrifugal |
| Suction Tube Length | 39 in |
| Metered | No |
| HP | 1 |
| Max. GPM for Oil | 14 |
| Motor Enclosure | TEFC |
| Phase | 1 |
| Max. Head | 200 ft. |
| Max. Temp. | 175 Degrees F |
| Item | Electric Operated Drum Pump |
| Max. Liquid Temp. | 175 Degrees F |
| Agency Compliance | 3A, ETL |
| Overall Length | 61 in |
| Height | 39 |
| Max. Pressure | 87 psi |
| GPM | 15 |
| Hz | 60 |
| Standards | 3A Certified (Pump) |
| Runs Dry | No |
| Food Grade | Yes |
| Discharge Tube Outlet ID | 1 1/2 in |
| Full Load Amps | 8.5 A |
| Max. Head Pressure | 87 psi |
| Suction Tube Material | Stainless Steel |
| Discharge Tube Outlet OD | 2 in |
| Diesel Exhaust Fluid Compatible | No |
| For Media Type | Acetic Acid, Ammonia, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Citric Acid, Ethylene Glycol, Glycerin, Hydraulic Oil, Methyl Chloride, Motor Oil, Nitric Acid, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene, Water |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Ammonia (Liquids), Ammonium Hydroxide, Antifreeze (Coolant), Calcium Chloride, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Methyl Chloride, Motor Oil, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene (50%) |
| Includes Nozzle | No |
| Number of Phases | 1 |
| Motor HP | 1 1/10 hp |
| Duty Cycle | Intermittent |
| Includes Discharge Hose | No |
| For Container Type | Drum |
| Thermal Protection | Yes |
| Max. Oil Flow | 12 gpm |
| Frequency (Hz) | 50/60 Hz |
| Variable Speed | Yes |
| Cord Length | 16 ft |
| Plug Type | NEMA 5-15-P |
| For Container Size | 55 gal |
| Discharge Connection Type | Tri-Clamp |
| Motor RPM | 0-10,000 |
| Noise Level | 88 db |
| Power Source | Electric |
| Includes Bung Adapter | No |
| Max. Head - Pumps | 200 ft |
| Max. Flow Rate | 12 gpm |
| Max. Fluid Temp. | 175 Degrees F |
| Housing Material - Pumps | 316 Stainless Steel |
| Includes Suction Tube | Yes |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetone, Chromic Acid 30%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, Ethyl (Ethanol), Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Formic Acid, Gasoline, Heptane, Hexane, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Toluene, Xylene |
| Suction Tube ID | 1 3/4 in |
| Suction Tube OD | 2 in |
| Gear Lube | NT |
| Max. Outlet Pressure | 87 psi |
| Rated Voltage | 110V AC |
| Grease | NT |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Drum Pump, 110VAC, 1 HP, 60 Hz, Dayton, Mfr#: 1DLT1
$5500,99
Free shipping will be applied on orders over $50
Electric Operated Drum Pump, Max. Head Pressure 87 psi, Max. Oil Flow 12 gpm, Max. Outlet Pressure 87 psi, For Use With SP-ENC-V-SP-800SR-1851P-39, Rated Voltage 110V AC, Plug Type NEMA 5-15-P, Suction Tube OD 2 in, Suction Tube Length 39 in, Cord Length 16 ft, Includes Bung Adapter No, Runs Dry No, Thermal Protection Yes, Frequency (Hz) 50/60 Hz, Power Source Electric, Variable Speed Yes, Includes Discharge Hose No, Self-Priming Yes
9999 in stock
Subtotal:
$5500.99
You must be logged in to post a review.
Reviews
There are no reviews yet.