| Property | Value |
|---|---|
| Item | Instant Adhesive |
| Consistency | Thin Liquid |
| Application | Overhead/Vertical Application,Repairing |
| Materials Bonded | Metal, Plastic, Rubber |
| Container Size | 0.7 fl oz |
| Container Type | Tube |
| Working Time | 15 sec |
| Begins to Harden | 15 sec. |
| Color | Clear |
| VOC Content Weight | 20 g/L |
| Series | 454 |
| Specific Gravity | 1.05 |
| Characteristics | Fixture Fast Fixture,General Purpose,Tensile Strength High Tensile Strength,Viscosity High Viscosity |
| Viscosity | Gel |
| Functional Cure | Not Specified |
| VOC Content | 20g/L |
| Adheres To | For Difficult to Bond Surfaces, Use on Porous Substrates, Irregular Rough and Acidic Surfaces |
| Chemical Type | Cyanoacrylate |
| Size | 20g |
| Full Cure | 24 hr |
| Gap Fill | 0.01 in |
| Tensile Strength | 2,190 psi |
| Temp. Range | -40.0 °F - 250.0 °F |
| Standards | 29 CFR 1910.1200, A-A-3097, CFIA |
| Low Odor | No |
| VOC Content Weight Percentage | 2 % |
| Shear Strength | 3,030 psi |
| Compatible Accelerator | Loctite SF 712 |
| Minimum Viscosity | 150 cps |
| Water Resistance | Not Water-Resistant |
| Interior/Exterior | Interior Only |
| Built-in Dispenser Type | No Dispenser/Applicator |
| Maximum Performance Temperature | 250 Degrees F |
| Maximum Application Temperature | 250 Degrees F |
| Cure Method | Humidity |
| Maximum Viscosity | 450 cP |
| Electrically Insulating | Yes |
| Minimum Application Temperature | -65 Degrees F |
| Features | Non-Wicking, Specially Suited to Porous Materials |
| Impact Resistant | No |
| Product Form | Gel |
| Viscosity - Adhesives | 150 to 450 cPs |
| Application method | Dispense System,Manual |
| Gap fill | 0.25 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Construction Adhesive, 454 Series, White, 9 oz, Cartridge
$27.79
Free shipping will be applied on orders over $50
Instant Adhesive, Adhesive Color Clear, Container Size 0.7 fl oz, Container Type Tube, Cure Method Humidity, Maximum Viscosity 450 cP, Minimum Viscosity 150 cps, Series 454, Built-in Dispenser Type No Dispenser/Applicator, Compatible Accelerator Loctite SF 712, Features Non-Wicking, Specially Suited to Porous Materials, Materials Bonded Metal, Plastic, Rubber, Primary Applications Plastics, Standards 29 CFR 1910.1200, A-A-3097, CFIA, Electrically Insulating Yes, Gap Fill 0.01 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.