| Property | Value |
|---|---|
| Thickness | 0.25 in |
| Material | Carbon Steel |
| Temper | Cold Finish |
| Carbon Steel Standards | ASTM A108, ASTM A29 |
| Item | 1018 Carbon Steel Rectangular Bar |
| Length Tolerance | +0.125 in/-0 in |
| Tensile Strength | 80,000 psi |
| Thickness (Decimal) | 0.25 in |
| Finish - Carbon Steel | Unpolished |
| Typical Yield Strength (PSI) | 54,000 psi |
| Grade - Carbon Steel | Low Carbon Steel |
| Width Tolerance | -0.005 in |
| Hardness Scale | Rb |
| Yield Strength | 54,000 psi |
| Thickness Tolerance | -0.003 in |
| Alloy Type - Carbon Steel | 1018 |
| Item - Carbon Steel | Rectangular Bar Stock |
| Length - Carbon Steel | 1/2 ft |
| Typical Hardness | 70 |
| Standards | ASTM A108, ASTM A29 |
| Typical Tensile Strength (PSI) | Not Rated |
| Width - Carbon Steel | 3 in |
| Straightness Tolerance | Not Rated |
| Machining Finish | Mill Finish |
| Metal Fabrication Process | Cold-Rolled |
| Heat Treatment | No Heat Treatment |
| Overall Width | 3 in |
| Heat Treatable | Yes |
| Fabrication | Cold Finished |
| Overall Length | 6 in |
| Machinability | 78 % |
| Brinell Hardness | 70 |
| Appearance | Unpolished |
| Material Grade | 1018 |
| Nominal Size (WxL) | 3 in x 6 in |
| Shape | Rectangular Bar |
| Rockwell Hardness | Not Rated |
| System of Measurement | Inch |
| Tolerance Rating | Undersized |
| Mechanical Finish | Mill |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Carbon Steel Rectangular Bar, 6" L, 3" W, EnjoyTool select, Mfr# 18F.25X3-6
$11.55
Free shipping will be applied on orders over $50
1018 Carbon Steel Rectangular Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.25 in, Thickness Tolerance -0.003 in, Overall Length 6 in, Overall Width 3 in, Fabrication Cold Finished, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Yield Strength 54,000 psi, Tensile Strength 80,000 psi, Brinell Hardness 70, Rockwell Hardness Not Rated, Machinability 78 Percent, Standards ASTM A108, ASTM A29, Appearance Unpolished, Length Tolerance +0.125 in/-0 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.