| Property | Value |
|---|---|
| Item | C-Frame Motor |
| Voltage | 230V AC |
| Shaft Dia. | 3/16 in |
| HP | 1/250 |
| Nameplate RPM | 3,000 |
| No. of Speeds | 1 |
| Motor Sub Application | Direct Drive Fan/Blower |
| RPM Range | 1,801-3,000 |
| Motor Shaft Rotation | CWSE |
| Phase | Single |
| Length Less Shaft | 1 5/8 in |
| Motor Mounting Type | Stud |
| Hz | 60 Hz |
| Shaft Length | 1 in |
| Max. Ambient Temp. | 40 Degrees C |
| Mounting Holes | (2) #8-32 |
| Stud Quantity | 2 |
| Motor Thermal Protection | Impedance with One-Shot Backup |
| Cord Length | 12 in |
| Stud Size | #8-32 |
| Mounting Stud Location | Shaft End |
| Ins. Class | B |
| O.C. Mounting | 1-7/8 in |
| Motor Application | HVAC/R |
| Motor Bearings | Sleeve |
| Standards | CSA (701887), UL (E37403/E40077/E47479) |
| Voltage Compatibility | 115/200-230V AC, 115/208-230V AC, 115/230V AC, 120/240V AC, 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/277V AC, 208-230/460V AC, 230V AC, 240V AC, 277/230V AC |
| Motor Design | Shaded Pole |
| Stack Size | 1/2 in |
| Motor Service Factor | 1 |
| Motor Enclosure Design | Open Air-Over |
| Full Load Amps | 0.17 A |
| Frame | Non-Standard |
| Ambient Temperature | 40 Degrees C |
| Motor Mounting Position | All Angle |
| Usable @ 200V | No |
| Usable @ 208V | No |
| Number of Shafts | 1 |
| Capacitor Required | No |
| Mounting | Stud |
| Frequency | 60 Hz |
| Number of Speeds | 1 |
| Country of Origin (subject to change) | Viet Nam |
| Package Quantity | 1 |
C-Frame Motor, Sleeve, Shaded Pole, 1 In. L, Dayton, Mfr#: 4M069E
$18.49
Free shipping will be applied on orders over $50
C-Frame Motor, Single Phase, Motor Design Shaded Pole, 1/250 HP, Nameplate RPM 3,000, No. of Speeds 1, Voltage 230V AC, Full Load Amps 0.17 A, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Impedance with One-Shot Backup, 60 Hz Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.