| Property | Value |
|---|---|
| Item | Booster Pump |
| Booster Pump Type | Booster Pump |
| HP - Pumps | 1 1/2 hp |
| Voltage - Pumps | 230V AC |
| Phase - Pumps | 1 |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Outlet Size - Pumps | 1-1/4 in NPT |
| Number of Stages - Pumps | 1 |
| Max. Pressure - Pumps | 43 psi |
| Housing Material - Pumps | Cast Iron |
| Motor Enclosure - Pumps | Open Dripproof |
| Wetted Materials | Brass,CI,416 SS,Buna N,Carbon,Silicon Carbide,BR |
| Inlet | 1-1/2 |
| Housing Material | Cast iron |
| Bearing Type | Ball |
| Agency Compliance | CSA, CUS, UL Listed |
| Voltage | 115/230 |
| Impeller Material | Brass |
| Motor Type | ODP |
| Hz | 60 |
| Phase | Single |
| Max. Case Pressure | 100 psi |
| GPM @ 25 PSI | 80 |
| Max. Dia. Solids | clear water |
| GPM @ 20 PSI | 88 |
| Stages | 1 |
| Includes | 1/4 in Drain Plug |
| HP | 1-1/2 |
| Seal Material | Buna-N, Carbon, Silicone Carbide, Stainless Steel |
| Motor RPM | 3450 |
| Impeller Type | Closed |
| Width | 8 1/4 in |
| Amps | 10.2 A |
| Duty | Continuous |
| GPM @ 40 PSI | 27 |
| Motor Ambient Temp. Rating | 65 Degrees C/149 Degrees F |
| Max. Pressure | 43 psi |
| Frame | NEMA 56J |
| Height | 3 5/16 in |
| Inlet (In.) | 1-1/2 FNPT |
| Motor Enclosure | Open Dripproof (ODP) |
| Outlet | 1-1/4 |
| Manufacturers Warranty Length | 1 yr |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| GPM @ 30 PSI | 68 |
| Length | 15 1/8 in |
| GPM @ 35 PSI | 47 |
| Standards | CSAus Listed |
| Overall Length | 15.13 in |
| Overall Width | 8.25 in |
| Overall Height | 9.5 in |
| Flow Rate @ 10 psi | 96 gpm |
| Maximum Media Temperature | 200 Degrees F |
| Suction Lift (Maximum) | 25 ft |
| For Use With Potable Systems | No |
| Compatible Discharge Pipe Size | 1 1/4 in |
| Priming | Manual |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Maximum RPM | 3,450 RPM |
| Nominal Voltage | 115/230V AC |
| Minimum Media Temperature | 34 Degrees F |
| Intake Size | 1 1/2 in |
| Mounting Orientation | Horizontal |
| Minimum Flow Rate | 1.5 gpm |
| Maximum Flow Rate | 80 gpm |
| Flow Rate @ 20 psi | 88 gpm |
| Impeller Design | Closed |
| Pressure Boost (Maximum) | 45 psi |
| Intake Type | NPT |
| Maximum Feet of Head | 99 ft of head |
| Shut Off Pressure (Maximum) | 43 psi |
| Motor Frame Designation | 56J NEMA |
| Number of Stages | 1 |
| Discharge Type | NPT |
| Case Pressure (Maximum) | 100 psi |
| Flow Rate @ 30 psi | 68 gpm |
| Frequency | 60 Hz |
| Series Family | 103 |
| Horsepower | 1 1/2 hp |
| Manufacturer Warranty Length | 1 yr |
| Compatible Intake Pipe Size | 1 1/2 in |
| Nameplate Voltage | 115/230V AC |
| Duty Cycle | Continuous |
| Pumping Application | City Water Mains, Private Water Systems |
| Series | CJ |
| Wetted Material | 416 Stainless Steel, Brass, Bromine, Buna-N, Cast Iron, Silicon Carbide |
| Compatible with Media Type | Clear Water Only |
| Feet of Head (Minimum) | 23 ft of head |
| Flow Rate @ 40 psi | 27 gpm |
| Solid Diameter (Maximum) | 0 in |
| Motor Enclosure Type | ODP |
| For Use With Systems | Non-Potable |
| Intake and Discharge Size | 1 1/2 in , 1 1/4 in |
| Pump Housing Material | Cast Iron |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Booster Pump, 1 1/2 hp, 230V AC, 1 Phase, 1-1/2 in NPT Inlet Size, 1 Stage, 43 psi Max Pressure, Flint & Walling, Mfr#: CJ103151
$1038.6
Free shipping will be applied on orders over $50
Booster Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1 1/2 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 10 psi 96 gpm, Flow Rate @ 20 psi 88 gpm, Flow Rate @ 30 psi 68 gpm, Flow Rate @ 40 psi 27 gpm, Shut Off Pressure (Maximum) 43 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT, Mounting Orientation Horizontal, For Use With Potable Systems No, Amps 10.2 A, Case Pressure (Maximum) 100 psi
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.