| Property | Value |
|---|---|
| Item | Shallow Well Jet Pump |
| HP | 1/2 hp |
| Pump Material | Cast Iron |
| Inlet | 1-1/4 in NPT |
| Includes | Diffuser, Drain Plug |
| Amps | 8.6/4.3 |
| Flow Rate @ 10 Ft. Lift @ 40 PSI | 8.7 gpm |
| Ejector Included | Yes |
| Discharge | 3/4 in NPT |
| Height (In.) | 6-3/4 |
| Pressure Switch Setting | 30 to 50 psi |
| GPM of Water @ 15 Ft @ 30, 50 PSI | 8.2 4.3 |
| Resists | Corrosion |
| NPT Inlet (In.) | 1-1/4 |
| Application | Ideal for Installations with Driven Well Points, Dug Wells, Drilled Wells or Cisterns Where Higher Operating Efficiencies are Desired, for Use When Vertical Distance to Water is Less Than 25 Feet and Installed as a Single Pipe System to the Water Source |
| Max. Operating Temp. (F) | 140 |
Pump, Jet, Shallow Well, DAYTON, Mfr# 1D881
$390.99
Free shipping will be applied on orders over $50
Shallow Well Jet Pump, HP 1/2 hp, Rated Voltage 115/230V AC, Amps 8.6/4.3, Ejector Included Yes, Flow Rate @ 10 Ft. Lift @ 30 PSI 9.6 gpm, Flow Rate @ 10 Ft. Lift @ 40 PSI 8.7 gpm, Flow Rate @ 10 Ft. Lift @ 50 PSI 6.0 gpm, Max. Suction Lift 25 ft, Inlet 1-1/4 in NPT, Discharge 3/4 in NPT, Max. Case Pressure 72 psi, Max. Operating Temp. 140, Shut Off Pressure 72 psi, Overall Length 19 3/4, Overall Width 9 7/8, Overall Height 6 3/4, Includes Diffuser, Drain Plug
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.