| Property | Value |
|---|---|
| Drill Bit Grouping | Drill Bit |
| Item | Jobber Length Drill Bit |
| Drill Bit Dimension Type | Metric |
| Drill Bit Size | 5.00 mm |
| Shank Type | Straight |
| Drill Bit Point Angle | 140 Degrees |
| Drill Bit Material | Carbide |
| Decimal Equivalent | 0.1969 |
| Drill Bit Finish | WXL |
| Material | Carbide |
| Flute Type | Spiral |
| Finish | Tin |
| Coolant Fed | Coolant Through |
| Shank Dia. | 5 mm |
| Overall Length | 95.00 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 45.00 mm |
| Maximum Drilling Depth | 45 mm |
| Grade | High Performance |
| Application | For Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Stainless Steels : 300, Stainless Steels : 400, Stainless Steels : 17-4PH,Titanium: 6Al4V, Hardened Steels : 35 HrC |
| Depth:Dia. Ratio | 5xD |
| List Number | 5210 |
| Point type | R Thinning |
| Coolant Through | Yes |
| Depth x Dia. Ratio | 5xD |
| Standards | Not Rated |
| Helix Angle | 30 Degrees |
| Shank Length | 50.00 mm |
| Primary Material Application | Cast Iron, Stainless Steel, Steel, Titanium |
| Secondary Material Application | Alloy Steel, Aluminum, Hardened Steel, High Carbon Steel |
| Sheeter Drill | No |
| Number of Coolant Holes | 2 |
| Measurement System | Metric |
| Shank Type - Machining | Straight |
| Secondary Material Application ISO Code | H, N, P |
| Drill Length Class | Jobber Length |
| Series | 5210 |
| Primary Material Application ISO Code | K, M, P, S |
| Finish - Machining | WXL |
| Drill Bit Point Type | R Thinning Point |
| Drill Diameter Tolerance | +0.000/-0.018 mm |
| Material - Machining | Carbide |
| Material Grade - Machining | High Performance |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
5.00mm Carbide TiN 140 Deg. Jobber Length Drill Bit, OSG, Mfr# 8667500
$99.19
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size 5.00 mm, Drill Bit Point Angle 140 Degrees , Carbide, WXL, Decimal Equivalent 0.1969, Metric, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 2
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.