| Property | Value |
|---|---|
| Item | Rotary Shaft Seal |
| Seal Type | Single Lip Seal |
| Inside Dia. | 9 mm |
| Outside Dia. | 16 mm |
| Width | 3 mm |
| Lip Material | Nitrile Rubber |
| Design Code | VG |
| Standards | DIN 3760 |
| Max. Pressure | 7 psi |
| Maximum Pressure | 7 psi |
| Seal Design | VG |
| Lip Material Application | Nitrile Rubber for General Applications |
| Case Coating | None |
| Spring Material | Not Applicable |
| Outside Diameter | 16 mm |
| Minimum Temperature | -40 Degrees F |
| Maximum Temperature | 250 Degrees F |
| Number of Lips | 1 |
| Spring Reinforcement | No |
| Spring Type | Not Applicable |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Contact Type | Contact Seal |
| Inside Diameter | 9 mm |
| Application | Needle Bearing or Rotary Applications |
| Hardness | 45 HRC @ 4 m/s and 55 HRC @ 10 m/s |
| System of Measurement | Metric |
| Overall Width | 3 mm |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Shaft Seal, VG, 9mm ID, Nitrile Rubber, DDS, Mfr# 091603VG
$7.29
Free shipping will be applied on orders over $50
Rotary Shaft Seal, Design Code VG, Inside Diameter 9 mm, Outside Diameter 16 mm, Overall Width 3 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, Spring Material Not Applicable, System of Measurement Metric, Application Needle Bearing or Rotary Applications, Case Coating None
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.