| Property | Value |
|---|---|
| Item | Washdown Motor |
| Motor Design | 3-Phase |
| Phase | Three |
| HP | 1/2 |
| RPM Range | 1,701-1,800 |
| Voltage | 230/460V AC |
| Frame | 56C |
| Motor Frame Material | Epoxy Coated Rolled Steel |
| Motor Thermal Protection | None |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Nominal Efficiency | 80 % |
| Motor Application | Washdown |
| Application | Washdown |
| Conduit Box | Cast Oversized Gasketed |
| Ins. Class | F |
| Standards | CSA Certified (258525), UL Recognized (E47479), USDA Approved |
| Full Load Amps | 1.6/8.0 A |
| Motor Bearings | Ball |
| CC Number | CC030A |
| Motor Mounting Type | Face |
| Motor Service Factor | 1.15 |
| Footnotes | 3,51 |
| Motor Mounting Position | Horizontal |
| Body Dia. | 6.5 in |
| Frame Material | Epoxy Coated |
| Length Less Shaft | 9 3/16 in |
| Inverter Rated | Yes |
| Max. Ambient Temp. | 40 Degrees C |
| Motor Shaft Rotation | CW/CCW |
| NEMA Design | B |
| Voltage Compatibility | 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/460V AC, 230/460V AC |
| Nameplate RPM | 1,750 |
| Overall Length | 11 1/4 in |
| Endshields | Cast Aluminum |
| Duty | Continuous |
| Drain Plugs | (4) Each End, (2) In Conduit Box |
| Shaft Dia. | 5/8 in |
| Motor Shaft Design | Keyed |
| Shaft Length | 2 in |
| Hz | 60/50 Hz |
| Shaft Material | 303 Stainless Steel |
| Endshield Material | Cast Aluminum |
| Duty Cycle | Continuous |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Washdown Motor, 3 Ph, TENV, 1/2 HP, 1750 rpm, DAYTON, Mfr# 1TTB6BG
$858.99
Free shipping will be applied on orders over $50
Washdown Motor, Three Phase, Motor Design 3-Phase, 1/2 HP, Nameplate RPM 1,750, Voltage 230/460V AC, Full Load Amps 1.6/8.0 A, 56C Frame, 60/50 Hz Hz, Motor Service Factor 1.15, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, NEMA Design B, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Face, Motor Mounting Position Horizontal, Motor Frame Material Epoxy Coated Rolled Steel
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.