| Property | Value |
|---|---|
| Item | Extra Long Drill Bit |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Fractional Inch |
| Shank Type | Straight |
| Drill Bit Size | 9/64 in |
| Size | 3.57mm |
| Drill Bit Material | Solid Carbide |
| Decimal Equivalent | 0.1406 |
| Drill Bit Finish | TiAlN+AlCrN |
| Drill Bit Point Angle | 140 Degrees |
| Material | Solid Carbide |
| Finish | TiNAl |
| Coolant Fed | Coolant Through |
| Point Angle | 140 Degrees |
| Shank Dia. | 4.00 mm |
| Overall Length | 5 13/16 in |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 4 31/64 in |
| Maximum Drilling Depth | 4 31/64 in |
| Depth x Dia. Ratio | 25xD |
| Application | For General Drilling, General Mechanical Engineering |
| Depth:Dia. Ratio | 25xD |
| Shank Type - Machining | Straight |
| Grade | WJ30EJ |
| Dimension Type | Fractional Inch |
| Point Type | Split point |
| List Number | DC170 |
| Flute Type | Spiral |
| Coolant Through | Yes |
| Standards | TP-NORM 68X |
| Series | Supreme |
| Drill Length Class | Extra Long |
| Number of Coolant Holes | 2 |
| Material - Machining | Carbide |
| Finish - Machining | TiAlN+AlCrN |
| Secondary Material Application ISO Code | H |
| Primary Material Application | Cast Iron, Steel |
| Drill Diameter Tolerance | H7 |
| Sheeter Drill | No |
| Primary Material Application ISO Code | K, P |
| Drill Bit Point Type | Split Point |
| Drill Point Length | 0.65mm |
| Secondary Material Application | Hardened Steel |
| Material Grade - Machining | WJ30EJ |
| Measurement System | Fractional Inch |
| Shank Length | 1 3/32 in |
| Point type | Split point |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Walter Titex - Solid carbide twist drill, Extra Long Drill, 9/64", Carbide, DC170-25-03.572A1-WJ30EJ, Walter, Mfr#: DC170-25-03.572A1-WJ30EJ
$504.99
Free shipping will be applied on orders over $50
Extra Long Drill Bit, Drill Bit Size 9/64 in, Drill Bit Point Angle 140 Degrees , Split Point, Carbide, TiAlN+AlCrN, Material Grade - Machining WJ30EJ, Maximum Drilling Depth 4 31/64 in, Fractional Inch, 25xD
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.