| Property | Value |
|---|---|
| Bore Dia. | 0.188 in x 0.125 in |
| Max. RPM | 12000 RPM |
| Outside Dia. | 0.512 in |
| Overall Length | 0.661 in |
| Weight | 0.0099 lbs |
| Material | Anodized Aluminum |
| Length | 0.661 in |
| Torsional Stiffness (Deg./In.-Lbs.) | 7.1 lb-in/Deg |
| Style | Clamp |
| Max. Temp. Range (F) | -110°F to 175°F (-78°C to 79°C) |
| Max. Angular Misalignment | 2.5 deg |
| Max. Parallel Misalignment (In.) | 0.003 in |
| Screw Size | M1.6 |
| Clearance Dia. (In.) | 0.571 in |
| Axial Motion | 0.012 in |
| Measurement Type | Inch |
| Moment of Inertia | 0.0142 lb-in^2 |
| Number of Screws | 2 |
| B1 Shaft Penetration | 0.276 in |
| Bore Tolerance | +0.001 in / -0.000 in |
| Screw Finish | Bright |
| B2 Shaft Penetration | 0.276 in |
| Dynamic Torque Non-Reversing | 4.9 lb-in |
| Screw Material | 18-8 300 Series Stainless Steel |
| Screw Seating Torque | 0.73 Nm |
| Dynamic Torque Reversing | 3.1 lb-in |
| Country of Origin (subject to change) | Ireland |
| Package Quantity | 1 |
Slit Coupling, Clamp, Short, Bores 0.188"x0.125", OD 0.512", Alumimum, Ruland, Mfr#: RSC8-3-2-A
$79.15
Free shipping will be applied on orders over $50
This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 12,000 RPM. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings. It is clamp style and has 0.188" x 0.125" bores, 0.512" OD, and 0.661" length. This short style slit coupling can fit in confined spaces where the long style may not fit. It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings. This slit coupling is manufactured by Reliance Precision Ltd. in their facility in County Cork, Ireland and is RoHS and REACH compliant.
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.