| Property | Value |
|---|---|
| Item | Taper Length Drill Bit |
| Drill Bit Dimension Type | Wire |
| Shank Type | Straight |
| Drill Bit Size | #12 |
| Drill Bit Point Angle | 140 Degrees |
| Decimal Equivalent | 0.1890 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | EgiAs |
| Flute Type | Spiral |
| Shank Dia. | 6.00 mm |
| Overall Length | 105.00 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 53.00 mm |
| Maximum Drilling Depth | 53.00 mm |
| Depth x Dia. Ratio | 8xD |
| Application | For Aluminum : 6061, 7071, Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Stainless Steels : 300, Stainless Steels : 400, Stainless Steels : 17-4PH, Nickel Alloy: Inconel, Titanium: 6Al4V, Hardened Steels : 35 HrC, Hardened Steels : 35-45 HrC, Hardened Steels : 45-50 HrC |
| List Number | 6520 |
| Point type | X Thinning |
| Depth:Dia. Ratio | 8xD |
| Grade | High Performance |
| Coolant Through | Yes |
| Standards | Not Rated |
| Coolant Fed | Coolant Through |
| Drill Bit Point Type | X Thinning Point |
| Drill Diameter Tolerance | +0.000mm/-0.018mm |
| Finish - Machining | EgiAs |
| Shank Type - Machining | Straight |
| Drill Length Class | Taper Length |
| Secondary Material Application ISO Code | H3, M, N, S2, S3 |
| Number of Coolant Holes | 2 |
| Helix Angle | 30 Degrees |
| Material - Machining | Carbide |
| Primary Material Application ISO Code | H1, H3, K, P, S3 |
| Series | 6520 |
| Sheeter Drill | No |
| Measurement System | Wire |
| Secondary Material Application | Aluminum, Inconel, Stainless Steel |
| Material Grade - Machining | High Performance |
| Shank Length | 52.00 mm |
| Primary Material Application | Hardened Steel, Steel, Titanium, Tool and Die Steel |
| Point Type | X Thinning |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Taper L Drill Bit, 105.00mm L, 6.00mm dia., OSG, Mfr# 8704480
$148.99
Free shipping will be applied on orders over $50
Taper Length Drill Bit, Drill Bit Size #12, Drill Bit Point Angle 140 Degrees , X Thinning Point, Carbide, EgiAs
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.