| Property | Value |
|---|---|
| Drill Bit Grouping | Drill Bit |
| Item | Jobber Length Drill Bit |
| Drill Bit Dimension Type | Fractional Inch |
| Drill Bit Size | 3/16 in |
| Shank Type | Straight |
| Drill Bit Point Angle | 140 Degrees |
| Drill Bit Material | Carbide |
| Drill Bit Finish | Black and Gold Oxide |
| Decimal Equivalent | 0.1875 |
| Flute Type | Spiral |
| Material | Carbide |
| Finish | Black and Gold Oxide |
| Coolant Fed | Coolant Through |
| Shank Dia. | 15/64 in |
| Overall Length | 3 7/32 in |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 1 11/16 in |
| Maximum Drilling Depth | 1 3/8 in |
| Number of Pieces | 1 |
| Point type | TDS Point |
| Application | Metalworking |
| Grade | WP20PD |
| Coolant Through | Yes |
| List Number | TDS402 |
| Depth:Dia. Ratio | 5xD |
| Depth x Dia. Ratio | 5xD |
| Standards | ANSI, DIN 6535, DIN 6537, ISO |
| Drilling Depth | 35.00mm |
| Shank Length | 1 13/32 in |
| Helix Angle | 25 Degrees |
| Primary Material Application | Steel |
| Measurement System | Fractional Inch |
| Series | TDS402 |
| Sheeter Drill | No |
| Spiral Direction | Right Hand |
| Material - Machining | Carbide |
| Drill Diameter Tolerance | M7 |
| Material Grade - Machining | WP20PD |
| Number of Coolant Holes | 2 |
| Drill Bit Point Type | TDS Point |
| Drill Point Length | 0.0311 in |
| Drill Length Class | Jobber Length |
| Shank Type - Machining | Straight |
| Primary Material Application ISO Code | P |
| Finish - Machining | TiAlN |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |
3/16" Carbide Black/Gold 140 Deg. Jobber Length Drill Bit, WIDIA, Mfr# TDS402A04763
$121.99
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size 3/16 in, Drill Bit Point Angle 140 Degrees , Carbide, TiAlN, Decimal Equivalent 0.1875, Fractional Inch, Drill Bit Point Type TDS Point, Coolant Through, Number of Coolant Holes 2
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.