| Property | Value |
|---|---|
| System of Measurement | Inch |
| Thread Size | 1 |
| Screw Length | 5 in |
| Screw Head Type | Cylindrical |
| Drive Type | Hex |
| Drive Size | 3/4 in |
| Material | Steel |
| Finish | Black Oxide |
| Min. Tensile Strength | 170,000 psi |
| Standards | ASME B18.3, ASTM A574 |
| Item | Socket Head Cap Screw |
| Vented Hole Size | Not Vented |
| Fastener Thread Type | UNC (Coarse) |
| Thread Length | 2 1/2 in |
| Head Height | 1 in |
| Thread Direction | Right Hand |
| Class | 3A |
| Temp. Range | - 20 Degrees F to 400 Degrees F |
| Thread Style | Partially Threaded |
| Rockwell Hardness | C38 to C43 |
| Package Quantity | 10 |
| Min. Thread Length | 2 1/2 in |
| Thread Type | Coarse |
| Minimum Temperature | -20 Degrees F |
| Pack Size | Small Pack |
| Maximum Temperature | 400 Degrees F |
| Material Type | Steel |
| Vent Hole Diameter | Not Applicable |
| Material Quality Standards | ASTM A574 |
| Dimensional Standards | ASME B18.3 |
| Countersink Angle | Not Applicable |
| Thread Fit | 3A |
| Thread Pitch | Not Applicable |
| Flange Thickness | Not Applicable |
| Tensile Strength | 170,000 psi |
| Minimum Thread Length | 2-1/2 in |
| Finish Type | Black Oxide |
| Flange Diameter | Not Applicable |
| Special Features | Not Applicable |
| Head Diameter | 1.5 in |
| Fastener Industry Standards | ASME B18.3, ASTM A574 |
| Fastener Finish | Black Oxide |
| Screw Style | Socket Head Cap Screw |
| Head Dia. | 1.5 in |
| Dia./Thread Size | 1 |
| Length | 5 in |
| Basic Material | Steel |
| Material Grade | Alloy Steel |
| Country of Origin (subject to change) | United States |
1"-8 Socket Head Cap Screw, Black Oxide Steel, 5 in Length, 10 PK, Kerr Lakeside, Mfr#: 100C500KCS
$111.99
Free shipping will be applied on orders over $50
Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 3/4 in, Material Alloy Steel, Finish Black Oxide, Thread Size 1 In.-8, Minimum Thread Length 2 1/2 in, Fastener Length 5 in, Head Height 1 in, Head Diameter 1.5 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.3, Flange Diameter Not Applicable, Flange Thickness Not Applicable
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.