| Property | Value |
|---|---|
| Item | Linear Pillow Block Bearing |
| Bore Dia. (In.) | 0.75 in |
| Material | Stainless Steel/Polymer Cage |
| Self-Alignment | Not Self-Aligning |
| Temp. Range (F) | 0 - 176 |
| Steady State Speed | 7 fps |
| Overall Width (In.) | 2.75 in |
| Bearing Type | Ball |
| Dimension O | 0.056 in |
| Dimension E | 2.375 in |
| Dynamic Load Capacity (Lb.) | 388 lb |
| Slot Width (In.) | 0.438 in |
| For Use With | Support and Feather Rails |
| Dimension K | 1.563 in |
| Dimension H1 | 3/16 |
| Static Load Capacity (Lb.) | 616 lb |
| Static Load Capacity (N) | 616 lbf |
| Dimension H | #8 |
| Dimension F1 | 1.25 in |
| Dimension P | 1.33 in |
| Dynamic Load Capacity (N) | 388 lbf |
| Dimension J | 0.313 in |
| Type | Open Pillow Block |
| Flange Thickness (In.) | 0.312 in |
| Bolt Size | #8 |
| Dimension S | 1.938 in |
| Dimension B | 2.75 in |
| Dimension A | 0.937 in |
| Retaining Ring | Eaton |
| Dimension G | 1.875 in |
| Dimension R | 0.438 in |
| Dimension F | 3.5 in |
| Overall Height (In.) | 1 9/16 in |
| Finish | Standard Anodized |
| Color | Black, Silver |
| Body Width (In.) | 1.875 in |
| Mounting Hole Dia. (mm) | 0.1875 in |
| Locking Type | Roll Pin |
| Mounting Hole Dia. (In.) | 0.1875 in |
| Mounting Surface to Shaft Center (In.) | 0.938 in |
| Lubrication | No Lubrication System |
| Dimension M (In.) | 1.625 in |
| Overall Length (In.) | 4.5 in |
| Dimension C | 4.5 in |
| Housing Style | Twin |
| Dimension a | 0.937 in |
| Series | Dayton |
| Flange Thickness | 0.312 in |
| Maximum Operating Temperature | 176 Degrees F |
| Flange Width | 2.75 in |
| Inside Dia. | 3/4 in |
| System of Measurement | Inch |
| Length (In.) | 4 1/2 in |
| Minimum Operating Temperature | -4 Degrees F |
| Overall Height | 1 5/8 in |
| Mounting Surface to Shaft Center | 0.938 in |
| Static Load Capacity | 616 lbf |
| Overall Length | 4 1/2 in |
| Dynamic Load Capacity | 388 lbf |
| Pillow Block Type | Open |
| Slot Width | 0.438 in |
| Inside Diameter | 3/4 in |
| Mounting Hole Diameter | 0.187 in |
| Body Width | 1.875 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block, 0.750 In Bore, 4.500 In L, Dayton, Mfr#: 2CNR2
$208.99
Free shipping will be applied on orders over $50
Linear Pillow Block Bearing, System of Measurement Inch, Inside Diameter 3/4 in, Overall Length 4 1/2 in, Self-Alignment Not Self-Aligning, Material Stainless Steel/Polymer Cage, Static Load Capacity 616 lbf, Dynamic Load Capacity 388 lbf, Steady State Speed 7 fps, Series Dayton, Maximum Operating Temperature 176 Degrees F, Minimum Operating Temperature -4 Degrees F, Housing Style Twin, Pillow Block Type Open, Locking Type Roll Pin, Bolt Size #8, Finish Standard Anodized, Overall Height 1 5/8 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.