| Property | Value |
|---|---|
| Item | Jobber Length Drill Bit |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Wire |
| Drill Bit Size | #58 |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Finish | Bright (Uncoated) |
| Decimal Equivalent | 0.0420 |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Shank Dia. | 1/32 in |
| Overall Length | 1-5/8 in |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 11/16 in |
| Maximum Drilling Depth | 1/2 in |
| Depth:Dia. Ratio | 4xD |
| List Number | 1898 |
| Standards | ASME B94.11M |
| Depth x Dia. Ratio | 4xD |
| Helix Angle | 21 Degrees to 34 Degrees |
| Primary Material Application | Aluminum and Non-Ferrous Material, Cast Iron, Steel |
| Shank Length | 15/16 in |
| Spiral Direction | Right Hand |
| Drill Point Length | 0.0126 in |
| Shank Type - Machining | Straight |
| Measurement System | Wire |
| Material - Machining | High Speed Steel |
| Drill Bit Point Type | Conventional Point |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Series | 1898 |
| Finish - Machining | Bright (Uncoated) |
| Primary Material Application ISO Code | K, N, P |
| Drill Length Class | Jobber Length |
| Aircraft Drill | No |
| Web Thinning | Thinned |
| Number of Coolant Holes | 0 |
| Sheeter Drill | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
118° General Purpose Jobber Length Drill Cle-Line 1898 Bright HSS RHS/RHC #58, CLE-LINE, Mfr# C23026
$1.25
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size #58, Drill Bit Point Angle 118 Degrees , High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.0420, Wire, Drill Bit Point Type Conventional Point, Non-Coolant Through, Number of Coolant Holes 0
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.