| Property | Value |
|---|---|
| Bearing Insert Type | Radial Ball |
| Bore Dia. | 2 15/16 in |
| Shaft Locking Type | Set Screws |
| Bearing Housing Material Type | Cast Iron |
| Bearing Insert Material | Alloy Steel |
| Bolt Hole Center-to-Center | 9 in |
| Mounting Surface to Shaft Center | 3 1/2 in |
| Series | Medium Duty |
| Number of Bolts | 2 |
| Temp. Range | -20 Degrees to 250 Degrees F |
| Dimension S | 1 5/16 in |
| Item | Pillow Block Bearing |
| Bearing Lubrication | Shell Alvania #3 or NLGI #3 Equivalent |
| Dimension H | 3 1/2 in |
| Finish | Painted |
| Static Load Capacity | 11,900 lb |
| Housing Material | Cast Iron |
| Dynamic Load Capacity | 16,300 lb |
| Overall Width | 3.5 in |
| Overall Length | 13 in |
| Dimension L | 13 in |
| Dimension B | 3 1/4 in |
| Dimension N | 15/16 in |
| Locking Type | Set Screw |
| Bolt Size | 3/4 in |
| Dimension J | 9 in |
| Dimension H2 | 7 in |
| Dimension A | 3 1/2 in |
| Dimension D | 2 15/16 in |
| Dimension E | 3 57/64 in |
| Overall Height | 7 in |
| Dimension H1 | 1 1/4 in |
| Bore Type | Cylindrical |
| Number of Mount Holes | 2 |
| Bearing Material Grade | 52100 |
| Base Height | 1.252 in |
| Inner Ring Width | 3.252 in |
| Dynamic Radial Load Capacity | 16,299 lbf |
| Maximum Speed | 1,900 RPM |
| Mounting Bolt Size | 3/4 in |
| Base Width | 3.5 in |
| Center Height | 3 31/64 in |
| Mount Type | Bolt-Through |
| Seal Type | Contact |
| Mount Hole Center-to-Center Length | 9 in |
| Static Radial Load Capacity | 11,915 lbf |
| Housing Material Finish | Black Oxide |
| Bore Diameter | 2 15/16 in |
| Minimum Temperature | -40 Degrees F |
| Maximum Temperature | 250 Degrees F |
| Seal Material | Nitrile Rubber |
| Features | Light Duty |
| Lubricant Material | NLGI #3 Equivalent |
| Mount Hole Size | 0.937 in x 2 in |
| System of Measurement | Inch |
| Closure | Open |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Pillow Block Bearing, Ball, 2-15/16" Bore, NTN, Mfr# UCPX-2.15/16M
$404.99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.252 in, Base Width 3.5 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 15/16 in, Bore Type Cylindrical, Center Height 3 31/64 in, Closure Open, Housing Material Cast Iron, Lubricant Material NLGI #3 Equivalent, Maximum Speed 1,900 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 9 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 7 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.