| Property | Value |
|---|---|
| Roller Style | Stud |
| Roller Shape | Flat |
| Face Design | Screwdriver Slot |
| Roller Dia. | 1.125 in |
| Roller Width | 5/8 in |
| Stud Dia. | 0.4375 in |
| Stud Length | 1 in |
| Stud Type | Concentric |
| Stud Length (In.) | 1.000 |
| Stud Dia. (In.) | 0.4375 |
| Item | Cam Follower |
| Agency Compliance | ABMA |
| Type | Stud |
| Roller Material | Alloy Steel |
| Thread Size | 7/16-20 |
| Number of Bearings | 1 |
| Bearing Type | Needle Roller |
| Roller Type | Screwdriver Slot Head |
| Static Load Capacity (Lb.) | 3,100 lb |
| Roller Width (In.) | 0.6250 |
| Roller Dia. (In.) | 1.1250 |
| Dynamic Load Capacity (Lb.) | 3,030 lb |
| Stud Material | Carbon Steel |
| Thread Length (In.) | 0.5 in |
| Bearing Material | Alloy Steel |
| Drive Location | Stud |
| Minimum Temperature | -30 Degrees F |
| Overall Length | 1 21/32 in |
| Duty Type | Standard |
| Load Direction | Radial |
| Flange Thickness | Not Applicable |
| Lubrication Openings | Oiler Hole |
| Static Radial Load Capacity | 3,100 lbf |
| Rolling Element Rows | 1 |
| Standards | ABMA |
| System of Measurement | Inch |
| Dynamic Radial Load Capacity | 3,030 lbf |
| Maximum Temperature | 250 Degrees F |
| Closure | Open |
| Seal Type | Not Applicable |
| Stud Thread Size | 7/16 |
| Drive Type | Slotted |
| Stud Diameter | 7/16 in |
| Bearing Material Grade | AISI 52100 |
| Stud Thread Length | 1/2 in |
| Features | Screwdriver Slot Stud Type Needle Roller Bearings are Recommended Where Running Loads and Shock Loads are Moderate. Bearing Capacity of the Stud Type Series is Limited by the Moderately Sized Stud. |
| Roller Material Grade | 52100 |
| Flange Diameter | Not Applicable |
| Roller Head Type | Flat |
| Roller Diameter | 1 1/8 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Cam Follower, Standard Stud, Unsealed, Smith Bearing, Mfr#: CR-1-1/8
$16.75
Free shipping will be applied on orders over $50
Cam Follower, Closure Open, Drive Type Slotted, Duty Type Standard, Face Design Screwdriver Slot, Overall Length 1 21/32 in, Roller Diameter 1 1/8 in, Roller Head Type Flat, Roller Material Alloy Steel, Roller Width 5/8 in, Rolling Element Rows 1, Seal Type Not Applicable, Stud Material Carbon Steel, Stud Thread Size 7/16 In.-20, Stud Type Concentric, System of Measurement Inch, Bearing Material Alloy Steel, Bearing Material Grade AISI 52100, Bearing Type Needle Roller, Drive Location Stud
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.