| Property | Value |
|---|---|
| LK2 | On: 10GBase-T link present; Blinking quickly: Link present and receiving data; Blinking slowly: Link disabled because Link 1 went down; Off: 10GBase-T link is not active |
| Test Mode | Through the use of three dip switches the unit, and its peer, can be placed into a link test mode which will verify the integrity of the link through the use of its built-in link test generator. The unit can also be placed into a simple line loopback. |
| Operating temperature | 0° C to 50° C (32° F to 122° F) |
| Storage Humidity | 5% to 95% non-condensing |
| Electrical Safety | UL 60950-1 |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| EEE Green Ethernet | When enabled (default), the media converter will operate as an IEEE 802.3az Energy Efficient Ethernet (EEE) compliant device. |
| Storage temperature | minimum range of -25° C to 70° C (-13° F to 158° F) |
| Operating Humidity | 5% to 90% non-condensing |
| Fiber Fault Alert | Enabled (Default - Up); With Fiber Fault Alert the state of the 10 Gigabit ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G ethernet interface of the media converter; Disabled (Down) |
| Emissions | FCC Part 15 Class A, EN55022 Class A |
| Power / TST | On: Power indication and in normal operation; Blinking slowly: the unit is in loopback or test mode (either port); Red solid: the unit has a hardware error (upon power up); Red and blinking: the unit has a hardware error specified by combination of LK1 and LK2 |
| Immunity | EN55024 |
| Loopback | Capable of performing a loopback on the 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilizing their own in-house test generators for testing the link. |
| LK1 (SFP/XFP) | On: Link present; Blinking quickly: Fiber link present and receiving data.(including test data); Blinking slowly: Fiber link disabled because the other fiber link went down; Blinking 1 sec on 3 sec off - module shut down due to high temperature; Off: No fiber link present or no module inserted |
| Country of Origin (subject to change) | Canada |
| Package Quantity | 1 |
C-10Gt-Xfph Media Converter, Perle Systems, Mfr#: 05061560
$1371.99
Free shipping will be applied on orders over $50
C-10GT-XFPH - 10 Gigabit Media Converter Module: 10GBASE-T (RJ-45) [100 m/328 ft.] (CAT6A or better) to fiber 10GBase-X or copper 10GBase-CX4 XFP. XFP slot (empty). Supports Power Level 4 XFPs
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.