| Property | Value |
|---|---|
| Gearmotor Type | DC Gearmotor |
| Gearmotor Voltage | 180V DC |
| Max. Torque | 831 in-lb |
| Gearmotor Shaft Type | Hollow |
| Gearmotor Shaft Orientation | Right Angle |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Nameplate RPM | 7.5 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Shaft Orientation | Right Angle |
| No Load RPM | 7.5 RPM |
| Thermal Protection | None |
| Lubrication | PowerSTAR EP |
| Enclosure | TENV |
| Housing Material | Steel |
| Reversible Shaft Output | Yes |
| Mounting | All Position |
| Full Load Amps | 0.66 A |
| Overall Length | 14.01 in |
| Seals | Lip Type |
| Shaft | Hollow Output |
| Gear Material | Steel |
| Gear Case | Die Cast Aluminum |
| RPM Range | 0 to 15 |
| Voltage | 180VDC |
| Overhung Load | 940 lb |
| Max. Ambient Temp. | 40 Degrees C |
| Bearings | Ball |
| Input HP | 1/8 |
| Application | Conveyors, Gate operators, Pumping stations |
| Gearmotor Rotation | CW/CCW |
| Insulation Class | F |
| Standards | CuRus |
| Item | Dc Gearmotor |
| Brushes | Externally Replaceable |
| Gear Ratio | 240:1 |
| Rotation | CW/CCW |
| Motor Type | Permanent Magnet DC |
| Finish | Powdered Coat |
| Gear Type | Hypoid |
| Mounting Orientation | Any Angle |
| Nameplate Speed | 7.5 RPM |
| Overhung Load Capacity | 940 ft-lb |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Motor Duty Class | Intermittent |
| Operating Voltage | 180V DC |
| Seal Type | Lip Type |
| Bearing Type | Ball |
| No Load Speed | 7.5 RPM |
| Full Load Current | 0.8 A |
| Maximum Torque | 831 in-lb |
| Housing Material Finish | Powder Coated |
| Input Horsepower | 1/8 hp |
| Maximum Ambient Temperature | 40 Degrees C |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
DC Gearmotor, 180VDC, 7.5 rpm, 1/8 HP, 240:1, BISON GEAR & ENGINEERING, Mfr# 021-725F0240
$843.99
Free shipping will be applied on orders over $50
DC Gearmotor, Shaft Orientation Right Angle, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 180V DC, Motor Type Permanent Magnet DC, Nameplate Speed 7.5 RPM, Maximum Torque 831 in-lb, Overhung Load Capacity 940 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 240:1, Input Horsepower 1/8 hp, Application Conveyors, Gate operators, Pumping stations, Bearing Type Ball
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.