| Property | Value |
|---|---|
| Item | Lathe |
| Motor HP | 7-1/2 |
| Phase | Three |
| Voltage | 230/460V AC |
| Frequency | 60 Hz |
| Swing Over Bed (In.) | 16 |
| Horsepower | 7 1/2 hp |
| Spindle Speed (RPM) | 25 to 1800 |
| Distance Between Centers (In.) | 60 |
| Thread Range (mm) | .05 to 20 |
| Longitudinal Feed Rates | 122 |
| Tailstock Taper | MT3 |
| Cross Travel (In.) | 9 |
| Number of Threads (mm) | 24 |
| Bed Width (In.) | 13-3/8 |
| Thread Range (In.) | 1-5/8 to 72 |
| Spindle Bore (In.) | 3-1/8 |
| Swing In Gap (In.) | 27-7/8 |
| Swing Over Cross Slide (In.) | 10 |
| Overall Height | 116 1/2 in |
| Number of Threads (In.) | 61 |
| Number of Spindle Speeds | 12 |
| Overall Length | 116 1/2 in |
| Includes | (5) 12 in Faceplates, 10 in 3 Jaw Scroll Chuck with Top Reversing Jaws, Acu-Rite 300S DRO, Articulating LED Work Lamp, Centrally Located Controls with Jog Button, E-Stop on Carriage, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, Follow Rest, Foot Brake, Full Length Splash Guard and Coolant Return, Fully Integrated Coolant System, Large Capacity Steady Rest with Ball Bearing Tips, Live Center, Mounting Pads and Levelers, Quick Change Tool Post Set, Threading Dial, Tolerance Test Certificate, Tool Box and Adjusting Tools |
| Overall Width | 40 in |
| Compound Travel (In.) | 5-1/8 |
| Features | 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSI Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings, Acu-Rite 200S DRO and Taper Attachment |
| Cross Feed Rates | 122 |
| Gap Length (In.) | 12-1/4 |
| Tailstock Travel (In.) | 5 |
| Carriage Travel (In.) | 55 |
| Spindle Taper | MT-7 |
| Bed Width | 8 3/4 in |
| Min. Threads per Inch | 1 5/8 |
| Max. Spindle Speed | 1,800 RPM |
| Swing Over Bed | 16 in |
| Spindle Bore | 3 1/8 in |
| Max. Cross Feed | 0.0360 in |
| Spindle Nose Type | D1-4 Camlock |
| Min. Spindle Speed | 25 RPM |
| Min. Metric Thread | 0.05 mm |
| Swing In Gap | 25 1/2 in |
| Max. Threads per Inch | 72 |
| Distance Between Centers | 60 in |
| Max. Metric Thread | 20 mm |
| Swing Over Cross Slide | 10 in |
| Number of Metric Threads | 24 |
| Number of Inch Threads | 61 |
| Min. Cross Feed | 0.0006 in |
| Gap Length | 12 1/4 in |
| Application | Turning |
| Sound Level | 88 dB |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Lathe, 230/460 Volts, 7 1/2 HP, 3 Phase, JET, Mfr# 321543
$38549
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 60 in, Voltage 230/460V AC, Horsepower 7 1/2 hp, Min. Spindle Speed 25 RPM, Application Turning, Overall Height 116 1/2 in, Overall Length 116 1/2 in, Overall Width 40 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.