| Property | Value |
|---|---|
| Motor Thermal Protection | Auto |
| Standards | CSA Certified (258501), UL Recognized (E37403) |
| Shaft Length | 6 in |
| Motor Mounting Position | All Angle |
| Hz | 60 Hz |
| Duty | Continuous |
| Nominal Efficiency | 72.5 % |
| Motor Service Factor | 1 |
| Includes | 2-1/2 in Ring Conversion Kit |
| No. of Speeds | 3 |
| Capacitor Required | 2MDV6 |
| Bolt Circle Dia. | 5 1/8 in |
| Max. Ambient Temp. | 40 Degrees C |
| Frame | 48YZ |
| HP | 1/2 |
| Motor Shaft Rotation | CW/CCW |
| Full Load Amps | 4.0-4.5 A |
| Voltage Compatibility | 115/208-230V AC, 200-230V AC, 208-220/440V AC, 208-230/277V AC, 208-230/440V AC, 208-230/460V AC, 208-230V AC, 208-240V AC |
| Application | Blowers, Fans and Air Circulators |
| Body Dia. | 5 5/8 in |
| Overall Length | 12 3/16 in |
| RPM Range | 1,601-1,700 |
| Phase | Single |
| Ins. Class | B |
| Motor Mounting Type | Stud |
| Voltage | 208-230V AC |
| Motor Enclosure Design | Open Air-Over |
| Item | Direct Drive Blower Motor |
| Length Less Shaft | 6 3/16 in |
| Motor Sub Application | Direct Drive |
| Motor Bearings | Sleeve |
| Nameplate RPM | 1,625 |
| Motor Design | Permanent Split Capacitor |
| Ring to Ring Center | 5 3/4 in |
| Resilient Ring Dia. | 2 1/4 in |
| Shaft Dia. | 1/2 in |
| Motor Shaft Design | Double-Flat |
| Motor Application | HVAC/R |
| Duty Cycle | Continuous |
| Number of Speeds | 3 |
| Mounting | Stud |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Motor, 1/2hp, D/D Blower, DAYTON, Mfr# 3LU82
$179.26
Free shipping will be applied on orders over $50
Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/2 HP, Nameplate RPM 1,625, No. of Speeds 3, Voltage 208-230V AC, Full Load Amps 4.0-4.5 A, 48YZ Frame, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.