| Property | Value |
|---|---|
| Number of Flutes | 4 |
| Length of Cut | 19.00 mm |
| Single End/Double End | Single End |
| End Mill Cutting Type | Center Cutting |
| Shank Dia. | 8.00 mm |
| Overall Length | 63.00 mm |
| Neck Dia. | 0.0000 in |
| Corner Radius | 0.000 in |
| List Number | CEM-SE-4M-AT |
| Helix Angle | 30 Degrees |
| Cutting Direction | Right Hand |
| Milling Dia. | 6.50 mm |
| End Mill Application | Profile, Ramping |
| Chamfer Width | 0.000 in |
| Series | CEM-SE-4M-AT |
| Neck Length | 0.0000 in |
| Item | Square End Mill |
| End Mill Style | Square |
| Secondary Material Application ISO Code | M |
| Secondary Material Application | Stainless Steel |
| Max. Helix Angle | 30 Degrees |
| Finish - Machining | AlTiN |
| Material Grade - Machining | General Purpose |
| Shank Type - Machining | Straight |
| Measurement System | Metric |
| Spiral Direction | Right Hand |
| Material - Machining | Carbide |
| Primary Material Application | Cast Iron, Steel |
| For Material Hardness | Low Carbon Steel: 13 to 38 HRC, Alloy Steel: 16 to 38 HRC, Cast Iron: Gray 18 to 22 HRC, Nodular 22 to 32 HRC |
| Drilling Tool Configuration | Individual |
| Flute Type | Spiral |
| Primary Material Application ISO Code | K, P |
| Chip-Breaker | No |
| Min. Helix Angle | 37 Degrees |
| Number of Coolant Holes | 0 |
| Coolant Fed | Non-Coolant Through |
| Material Applications | Alloy Steel, Carbon Steel, Alloy Steel, Carbon Steel, Cast Iron, Inconel, Nickel, Stainless Steel, Steel, Alloy Steel, Carbon Steel, Prehardened Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Square End Mill, CLEVELAND, Mfr# C98251
$38.39
Free shipping will be applied on orders over $50
Square End Mill, 6.50 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm, Neck Dia. 0.0000 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.