| Property | Value |
|---|---|
| Item | Molded Case Circuit Breaker |
| Amps | 175 A |
| AC Voltage Rating | 600V AC |
| DC Voltage Rating | 250V DC |
| Max. AIR Rating | 25kA at 240V AC |
| Terminal Connection | Line/Load Lug |
| Series | JD |
| Number of Poles | 2 |
| Circuit Breaker Actuator | Toggle |
| Frame Size | 250A/JD |
| Circuit Breaker Mounting Style | Free Standing |
| Circuit Breaker Type | Standard |
| Standards | BS, CCC, CE Marked, CEI, CSA Certified, Federal Specification W-C-375B/GEN, HACR, HID, IEC, NEMA, NMX, NOM, SWD, UL Listed, UNE, UTE, VDE |
| Trip Type | Thermal Magnetic |
| Max. Wire Size | 4/0 AWG |
| Mounting | Free Standing |
| Depth | 5 in |
| Instantaneous Trip | Adjustable |
| Width | 2.7 in |
| Phase | Single |
| Phase Connection | Not Applicable |
| High Amp Trip Setting | 1,750 A |
| Min. Wire Size | 4 AWG |
| Height | 7.5 in |
| Low Amp Trip Setting | 875 A |
| Interrupt Rating | 25 kA at 220/240V AC, 18 kA at 380/440/415/480V AC, 14 kA at 500/525/600V AC, 20 kA at 250/500V DC |
| Features | Mercury Free, PVC Free |
| Application | HACR rated Applications, Distribution |
| Tightening Torque | 221.27 lbf.in (25 N.m) 0.04 to 0.15 in? (25 to 95 mm?) (AWG 4 to AWG 4/0) |
| Device Application | Distribution |
| Trip Unit Technology | Thermal-magnetic |
| Operating Altitude | Less than 6561.68 ft (2000 m) without derating, 5000 m with derating |
| Rated Operational Voltage | 600 V AC 50/60 Hz IEC 60947-3 |
| Circuit Breaker Application | HACR rated |
| Rated Impulse Withstand Voltage | 8 kV IEC 60947-2 |
| Utilisation Category | Category A |
| Network Frequency | 50/60 Hz |
| Number Of Slots | 2 auxiliary switch OF plug-in), 1 alarm switch SD plug-in), 1 overcurrent trip switch SDE plug-in), 1 voltage release MN or MX plug-in) |
| IP Degree Of Protection | Front cover IP40 |
| Power Wire Stripping Length | 0.98 in (25 mm) |
| Rated Service Breaking Capacity | 25 kA 220/240 V AC 50/60 Hz IEC 60947-2, 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2, 14 kA 500/525 V AC 50/60 Hz IEC 60947-2, 20 kA 250 V DC IEC 60947-2, 20 kA 500 V DC IEC 60947-2 |
| Rated Insulation Voltage | 750 V IEC 60947-2 |
| Protection Type | Overload protection, Short-circuit protection |
| Breaking Capacity | 25 kA 240 V AC 50/60 Hz UL 489, 18 kA 480 V AC 50/60 Hz, 14 kA 600 V AC 50/60 Hz, 20 kA 250 V DC |
| Ambient Air Temperature For Storage | -58 to 185°F (-50 to 85°C) |
| Suitability For Isolation | Yes IEC 60947-2 |
| Quality Labels | CE |
| AWG Gauge | AWG 4 to AWG 4/0 aluminium/copper terminal |
| Magnetic Tripping Current | 1750 A |
| Product Certifications | UL, CSA, NOM |
| Local Signalling | Switched off (OFF) 1 trip indicator green) |
| Communication Interface | Modbus, Ethernet |
| Pollution Degree | 3 IEC 60947-1 |
| Mounting Mode | Unit mount lug) |
| Product Name | PowerPact J |
| Continuous Current Rating | 0.8 |
| Electrical Connection | Lugs, line, Lugs, load |
| Breaking Capacity Code | D |
| Ambient Air Temperature For Operation | 28 to 158°F (-2 to 70°C) |
| Long Time Pick-Up Adjustment Range | 0.25 to 1 x In |
| Terminal Identifier | AL175JD |
| Mounting Support | Lug |
| Product Or Component Type | Circuit breaker |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Molded Case Circuit Breaker, 175 A, 600V AC, 2 Pole, Free Standing Mounting Style, JD Series, SQUARE D, Mfr# JDL26175
$1604.99
Free shipping will be applied on orders over $50
Molded Case Circuit Breaker, 175 A Amps, AC Voltage Rating 600V AC, Max. AIR Rating 25kA at 240V AC, For Use With -, Series JD, High Amp Trip Setting 1,750 A, Low Amp Trip Setting 875 A, Circuit Breaker Type Standard, Number of Poles 2, DC Voltage Rating 250V DC, Terminal Connection Line/Load Lug, Trip Type Thermal Magnetic, Phase Single, Instantaneous Trip Adjustable, Phase Connection Not Applicable, Frame Size 250A/JD, Circuit Breaker Mounting Style Free Standing, Height 7.5 in, Width 2.7 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.