| Property | Value |
|---|---|
| Gearmotor Type | DC Gearmotor |
| Gearmotor Voltage | 12V DC |
| Max. Torque | 623 in-lb |
| Gearmotor Shaft Type | Hollow |
| Gearmotor Shaft Orientation | Right Angle |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Nameplate RPM | 10 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Seals | Lip Type |
| Gear Type | Hypoid |
| Thermal Protection | None |
| Full Load Amps | 11.6 A |
| Gear Material | Steel |
| Overall Length | 14.06 in |
| Motor Type | Permanent Magnet DC |
| Overhung Load | 870 lb |
| Gear Case | Die Cast Aluminum |
| Input HP | 1/8 |
| Standards | CuRus |
| Rotation | CW/CCW |
| Gearmotor Rotation | CW/CCW |
| Brushes | Externally Replaceable |
| Item | Dc Gearmotor |
| Reversible Shaft Output | Yes |
| Insulation Class | F |
| Voltage | 12VDC |
| Gear Ratio | 180.3:1 |
| Application | Agriculture, Conveyors, Food and Beverage Equipment, Industrial Machinery, Packaging |
| Shaft Orientation | Right Angle |
| Mounting | All Position |
| RPM Range | 0 to 15 |
| Housing Material | Steel |
| Max. Ambient Temp. | 40 Degrees C |
| Lubrication | Semi-Fluid Grease |
| No Load RPM | 10 RPM |
| Enclosure | TENV |
| Finish | Powdered Coat |
| Bearings | Ball |
| Shaft | Hollow Output |
| Shaft Dia. (Dimension U) | 1 |
DC Gearmotor, 12VDC, 10 rpm, 1/8 HP, 180:1, BISON GEAR & ENGINEERING, Mfr# 021-725A0180
$853.99
Free shipping will be applied on orders over $50
DC Gearmotor, Shaft Orientation Right Angle, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 12V DC, Motor Type Permanent Magnet DC, Nameplate Speed 10 RPM, Maximum Torque 623 in-lb, Overhung Load Capacity 870 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 180.3:1, Input Horsepower 1/8 hp, Application Agriculture, Conveyors, Food and Beverage Equipment, Industrial Machinery, Packaging, Output Shaft Diameter 1 in, Bearing Type Ball
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.