| Property | Value |
|---|---|
| Item | AC Gearmotor |
| Gearmotor Voltage | 115V AC |
| Gearmotor Phase | 1 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 18 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 4.6 RPM |
| Gearmotor Enclosure | Open |
| Gearmotor Rotation | CW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 2.88 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.32 |
| Standards | UL Recognized |
| Input HP | 1/250 hp |
| RPM Range | 0 to 15 |
| Hz | 60 Hz |
| Shaft Orientation | Parallel |
| Application | Agriculture, Amusement Devices, Controls, Conveyors, DVD Kiosks, Food and Restaurant Equipment, Ice Dispensing, Industrial Machinery, Ingredient Motors, Mail Sorting, Packaging, Pellet and Corn Stoves, Power Transmission, Printing Press, Pumps, Security Systems, Ticket Dispensing, Valve Actuators, Vending, Water Softeners, X-Ray Equipment |
| Gear Material | Sintered Steel |
| Overall Length | 10.87 in |
| Shaft Length (Dimension V) | 1 in |
| Motor Type | Shaded Pole |
| Phase | Single |
| Enclosure | Open |
| No Load RPM | 4.6 RPM |
| Reversible Shaft Output | No |
| Lubrication | Grease Filled |
| Gear Ratio | 709.17:1 |
| Starting Torque | 40 in-lb |
| Mounting | All Position |
| Gear Case Material | Die Cast Zinc |
| Capacitor Required | No |
| Motor Shaft Design | Round |
| Insulation Class | b |
| Number of Brake Discs Required | 0 |
| Rotation | CW |
| Brake | None |
| Overhung Load | 30 lb |
| Service Factor | 1 |
| Shaft | Single Output |
| Gears | Spur |
| Thermal Protection | Impedance |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. (Dimension U) | 5/16 in |
| Voltage | 115 |
| Finish | Unpainted |
| Gear Type | Spur |
| Housing | Die Cast Zinc |
| Bearings | Sintered Bronze Sleeve |
| Housing Material | Die Cast Zinc |
| Mounting Orientation | Any Angle |
| Motor Insulation Class | B |
| Output Shaft Height | 2.54 in |
| Maximum Torque | 18 in-lb |
| Full Load Current | 0.32 A |
| Input Horsepower | 0.55 hp |
| Overall Width | 2.5 in |
| Motor Enclosure | Open Air-Over |
| Mount Type | Any Position |
| Output Shaft Diameter | 5/16 in |
| Bearing Type | Sintered Bronze Sleeve |
| Number of Output Shafts | 1 |
| Operating Voltage | 115V AC |
| Frequency | 60 Hz |
| Housing Material Finish | Unpainted |
| Output Shaft Length | 1 in |
| No Load Speed | 4.6 RPM |
| Overhung Load Capacity | 30 ft-lb |
| Nameplate Speed | 4.6 RPM |
| Brake Type | None |
| Maximum Ambient Temperature | 104 Degrees F |
| Overall Height | 3.56 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
AC Gearmotor, Nameplate RPM 4, 0.32A, 115V
$49.85
Free shipping will be applied on orders over $50
AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 4.6 RPM, Maximum Torque 18 in-lb, Overhung Load Capacity 30 ft-lb, Rotation CW, Output Shaft Height 2.54 in, Mounting Orientation Any Angle, Operating Voltage 115V AC, Gear Ratio 709.17:1, Brake Type None, Shaft Orientation Parallel, Motor Insulation Class B
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.