| Property | Value |
|---|---|
| Bore Dia. | 12 mm x 11 mm |
| Max. RPM | 5000 RPM |
| Outside Dia. | 25 mm |
| Overall Length | 34.00 mm |
| Weight | 0.0687 lbs |
| Material | Anodized Aluminum |
| Length | 34.00 mm |
| Max. Parallel Misalignment (In.) | 0.40 mm |
| Clearance Dia. (mm) | 26.9 mm |
| Style | Clamp |
| Max. Angular Misalignment | 3 deg |
| Max. Temp. Range (F) | -110°F to 175°F (-78°C to 79°C) |
| Torsional Stiffness (Deg./In.-Lbs.) | 3.9 Nm/Deg |
| Screw Size | M3 |
| B1 Shaft Penetration | 9.6 mm |
| B2 Shaft Penetration | 9.6 mm |
| Screw Finish | Bright |
| Screw Seating Torque | 5.40 Nm |
| Bore Tolerance | +0.020 mm / -0.000 mm |
| Screw Material | 18-8 300 Series Stainless Steel |
| Number of Screws | 2 |
| Dynamic Torque Non-Reversing | 2.35 Nm |
| Measurement Type | Metric |
| Axial Motion | 0.70 mm |
| Dynamic Torque Reversing | 1.55 Nm |
| Moment of Inertia | 31.0 g.cm^2 |
| Country of Origin (subject to change) | Ireland |
| Package Quantity | 1 |
Slit Coupling, Clamp, Long, Bores 12x11mm, OD 25.0mm, Aluminum, Ruland, Mfr#: MRLC25-12-11-A
$89.55
Free shipping will be applied on orders over $50
This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 5,000 RPM. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings. It is clamp style and has 12mm x 11mm bores, 25.0mm OD, and 34.00mm length. This long slit coupling has increased torque and misalignment capabilities when compared to short styles. It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings. This slit coupling is manufactured by Reliance Precision Ltd. in their facility in County Cork, Ireland and is RoHS and REACH compliant.
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.