| Property | Value |
|---|---|
| Drill Bit Grouping | Drill Bit |
| Item | Jobber Length Drill Bit |
| Drill Bit Dimension Type | Wire |
| Drill Bit Size | #16 |
| Drill Bit Point Angle | 120 Degrees |
| Drill Bit Material | High Speed Steel |
| Drill Bit Finish | Black and Gold Oxide |
| Decimal Equivalent | 0.1770 |
| Material | High Speed Steel |
| Flute Type | Fast Spiral |
| Finish | Black and Gold Oxide |
| Coolant Fed | Non-Coolant Through |
| Shank Dia. | 6 mm |
| Overall Length | 91.00 mm |
| Cutting Direction | Right Hand |
| Number of Flutes | 2 |
| Flute Length | 47.00 mm |
| Maximum Drilling Depth | 47 mm |
| List Number | 1650 |
| Depth:Dia. Ratio | 5xD |
| Point type | S |
| Coolant Through | No |
| Depth x Dia. Ratio | 5xD |
| Standards | Not Rated |
| Application | For Aluminum : 6061, 7071, Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Stainless Steels : 300, Stainless Steels : 400, Stainless Steels : 17-4PH, Nickel Alloy: Inconel, Titanium: 6Al4V, Hardened Steels : 35 HrC |
| Shank Length | 44.00 mm |
| Helix Angle | 40 Degrees |
| Primary Material Application | Aluminum, Steel, Tool and Die Steel |
| Secondary Material Application | Cast Iron, Hardened Steel, High Carbon Steel, Nickel, Stainless Steel, Titanium |
| Primary Material Application ISO Code | N, P |
| Drill Bit Point Type | S Thinning Point |
| Material - Machining | High Speed Steel |
| Series | 1650 |
| Sheeter Drill | No |
| Drill Diameter Tolerance | +0.000/-0.018 mm |
| Measurement System | Wire |
| Finish - Machining | WD1 |
| Drill Length Class | Jobber Length |
| Secondary Material Application ISO Code | H, K, M, P, S |
| Shank Type - Machining | Straight |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
#16 HSS Black/Gold 120 Deg. Jobber Length Drill Bit, OSG, Mfr# 8655450
$24.89
Free shipping will be applied on orders over $50
Jobber Length Drill Bit, Drill Bit Size #16, Drill Bit Point Angle 120 Degrees , High Speed Steel, WD1, Decimal Equivalent 0.1770, Wire, Drill Bit Point Type S Thinning Point, Non-Coolant Through
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.