| Property | Value |
|---|---|
| Type | Single, Friciton Bearing |
| Outside Dia. | 1.495 in (38.0 mm) |
| Lubrication | LUBRIPLATE No. 1200-2 |
| SAE or Metric | Inch/Metric |
| Material | 303 Stainless Steel |
| Weight | 1.516 lbs |
| Length | 4.250 in (108.0 mm) |
| Max Square or Hex Bore (Metric) | 20 mm |
| Max Square or Hex Bore (Inch) | 0.7500 in |
| B2 Shaft Penetration | 1.400 in (35.6 mm) |
| Rated Torque | 1450 in-lb (163.8 Nm) |
| Max Blind Bore (Metric) | 31 mm |
| Max. Torque | 7250 in-lb (819.1 Nm) |
| Style | Machinable Bore, Assembled |
| Max Blind Bore (Inch) | 1.2500 in |
| Matching Boot | UBOOT24/38-NI-KIT |
| B1 Shaft Penetration | 1.400 in (35.6 mm) |
| Max Round Bore (Metric) | 22 mm |
| Hub Depth | 1.400 in (35.6 mm) |
| Max Round Bore With Key (Metric) | 22mm Bore, 6mm Keyway |
| Max Round Bore (Inch) | 0.875 in |
| Max Round Bore With Key (Inch) | 7/8 |
| Yoke Length (LY) | 2.125 in (54.0 mm) |
| Max Operating Angle | 45° |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Single U-Joint Kit, Machinable, 1.495" (38.0 mm) OD, Stainless, Ruland, Mfr#: US24-XX-XX-SS-KIT
$264.99
Free shipping will be applied on orders over $50
This Ruland machinable bore single friction bearing universal joint kit has a 1.495" outer diameter and 4.250" length. The design allows the user to put a bore size and/or geometry of their choice into each yoke. It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD). This single universal joint is made of a block, two pins, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 45°, which is a significant improvement over commodity style single universal joints. It is made from stainless steel for corrosion resistance. The user can add a boot to protect the joint from unwanted contaminants and increase service life. This single friction bearing universal joint is manufactured in the USA.
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.